Manufactured by B&P Engineering from certified materials belt feeders are used for transport of apples and coloured fruits.
Belt feeders can be flat, horizontal or inclined (rising or falling) at a specific angle. Depending on the application and customer requirements, the B&P Engineering manufactures one-way or two-way conveyors. In a one-way conveyor, the use of one drive shaft and one driven shaft makes the belt move in one direction only. In a two-way conveyor, two driven tension shafts and one drive shaft are used. This makes the belt move in both directions.
Belts can be guided on shoes, rollers or directly on a table. When required by the customer, a mesh can be installed in place of the belt. This solution is ideal for machines intended for work in extremely low (e.g. cooling rooms) or extremely high (e.g. ovens) temperatures.
|Belt width||400, 500, 650, 800, 1000, 1200 mm|
|Blade height (inclined system)||50, 70, 100, 120 mm|
|Conveyor length||as required by the customer|
Belt feeders can work as stand-alone units or as a part of a process line.
B&P Engineering‘s conveyors for the food industry are made of acid-resistant and plastic materials approved for contact with food. Non-alloy steel structures are protected with an anti-corrosive coat.
Due to the well-designed welded structure made of steel pipes and sections and the high quality of construction, all elements are easy to wash and auxiliary materials have no contact with the transported product.