The construction of transporting elements of the conveyors prevents the damage of raw material.
Apples are transported by a feeder to the inspection belt or roller table.
Trained employees carry out inspection and reject raw material which does not satisfy the requirements.
Offer of B&P Engineering includes a wide range of roller, screw, belt and vertical feeders. Their advantages are attractive price and perfect quality.
Elevators are devices used for vertical transport of e.g. apples.
The elevator consists of a tube, including interior shaft with adjustable screw blades and passive bearing. Screw blades vary depending on the type of transported material and the planned capacity. This tray is closed, which means that there is no direct access to the screw. Thanks to the closed structure, there are no problems with dusting and the products do not spill outside the machine during transport.
The device can be equipped with a pull screw. In this version, the drive unit is located in the direction of the raw material feeding.
Some screw feeders are equipped with push screws with a gear motor installed on the feeding side. The screw feeder is equipped with an initial or end bearing. Depending on the type of transported raw material, slide or bearing rests are installed.
When required by the customer, the screw feeder can be fitted with a washing system in the spindle. This enables washing the conveyor from the inside, eliminating the need to dismantle it.